 |
 |
| Supply section | Voltage | Fuse | Rating | Card No. |
| charging voltage for brake | 220 Vac | 1e1 | 2 amp. | 1 |
| maintaining voltage for brake | +25 Vdc | 1e2 | 2 amp. | 1 |
| contactor control voltage | 42 Vac | 1e3 | 2 amp. | 1 |
| optical cutting line indicator h42 | 12,5 Vac | 1e4 | 4 amp. | 1 |
| optical measurement indicator h40 | 9.5 Vac | 1e5 | 6,3 amp. | 1 |
| optical cutting line indicator h42 | 12.5 Vac | 1e6 | 4 amp. | 1 |
| light-barrier emitter lamps h35b | 5.8/6.2 Vac | 1e7 | 4 amp. | 1 |
| light-barrier emitter lamps h35a | 5,8/6.2 Vac | 1e8 | 4 amp. | 1 |
| supply voltage for -6 Vdc | 12,5 Vac | 2e1 | 4 amp. | 2 |
| control voltage | +6 Vdc | 2e2 | 2.5amp. | 2 |
| supply voltage for -6 Vdc | 12.5 Vac | 2e3 | 2 amp. | 2 |
| control voltage | -6 Vdc | 2e4 | 1 amp. | 2 |
| voltage for input-and final-amplifier | +15 Vdc | 3e1 | 0.5amp. | 3 |
| voltage for digital control and relays | + 24 Vdc | 3e2 | 4 amp. | 3 |
| supply voltage for +15V / +25V | 32 Vac | 3e3 | 6.3 amp. | 3 |
| voltage for input- and final- amplifier | 15 Vdc | 4e1 | 0.5 amp. | 4 |
| supply voltage for -15 Vdc | 25 Vac | 4e2 | 1 amp. | 4 |
| voltage for solenoids | +42 Vdc | 4e3 | 2.5 amp. | 4 |
| supply voltage for ÷ 42 Vdc | 50 Vac | 4e4 | 4 amp. | 4 |
| Operations of Machine | Card No's involved | Other Components |
| Standard operation | . | . |
| backgauge forward | 13, 22 | c12, b8, b9, b10a, m17 |
| backgauge backward | 13, 22 | c15, b13, b14, m17 |
| backgauge brake / fine | 12, 13, 22 | b10b, b18a, b18b, m19 |
| adjustment light-barrier | 8, 9 | LSL, LSF, f36, h35 |
| cutting and clamping | 8, 9 (9a),10 (10a) | b22a/b, b28a/b, m27a/b |
| air-table control | 11 | b87, a92, m93, m94 |
| Programming | . | . |
| erasing of marks | STK-BI, STK-TI | b272, f58 |
| track selection | STK-BI, -BII, -BIII, STK-TII | . |
| program tracks I and II | 201-2 | b278, b279 |
| program tracks III and IV | 203-4 | b280, b281 |
| track changing | STK-B III, STK-TII | b282 |
| setting of cutting marks
setting of limiting marks |
18, 201-2, 203-4, STK-TI | m57, b2O3a/b, b205, f58 |
| marking with cut | 11 | b270 |
| Eltromat control | . | . |
| automatic "on" | 11, STK-TllI | b290, b291 |
| backgauge feed "express" | 11,13, 22, STK-TIII | b 291, c 12 |
| backgauge feed "slow" | 11, 13, 14, 22, STK-TIII | b290, c11, c12 |
| autom. backward | 11,13,22, STK- TIII | c 15 |
| autom. change "express-slow" | 14, 15, 19, 201-2,
203-4,
211-2, 213-4, 22 |
c11, f 58 (advance heads) |
| stop on cutting-mark | 12, 15, 19, 20 1-2,
203-4,
21 1-2, 213-4, 22 |
f 58 (main heads) |
| autom. speed selection for
short distances |
14, 15, 19, 20 1-2,
203-4,
21 1-2, 213-4,22 |
c11 |
| foreward limitation / ejecting / autom. reversing | 13, 16, 17, 19, 201-2,
203-4,
21 1-2, 213-4, 22 |
c12, c15, f58 (reversing heads) |
| backward limitation /
autom. advancing "slow" |
13, 14, 16, 17, 19, 201-2, 203-4, 21 1-2, 213-4, 22 | c11, c12. c15, f58 (reversing heads) |
| autom. track - changing | 16, 17, 20 1-2,
203-4,
STK-BIII, STK-TII |
track combination |
| autom. feed after cut | 12, 22 | b22a/b, b29 |
| automatic knife | 10, 11, STK- T III | h 67 |
| autom. air-table control | 10, 11, 13 | . |
|
|