Proper maintenance of the cutter is essential to safety, dependable operation and accurate cutting. Following is a list of things the operator can do in only a few minutes a day to keep the machine running smoothly. You may want to print out this schedule and post it on the machine.
 

    DAILY
        CHECK ALL SAFETY DEVICES
        DUST OFF TABLE AFTER USE
        APPLY SILICONE SPRAY TO TABLE

    WEEKLY
        LUBRICATE BACKGAUGE (1 to 3 times per week)
        CHANGE BLADE (20-40 hours of use)
        CHECK OIL LEVELS AND INSPECT FOR LEAKS

    MONTHLY
        LUBRICATE GREASE FITTINGS
        CLEAN PAINTED SURFACES with general purpose cleaner
        CLEAN AND WAX TABLE

    QUARTERLY
        BLOW OUT MAIN DRIVE MOTOR AND FLYWHEEL
        CLEAN OUT FLYWHEEL GUARD
        CLEAN OIL DRIP PAN UNDER BACK TABLE
 

CLICK HERE FOR INSTRUCTIONS IN SPANISH